Solid Colour Epoxy Systems in Vancouver BC
Solid Colour Epoxy Flooring Vancouver
Clean, joint-free floor system: single-colour solid epoxy systems for Vancouver showrooms, commercial floors, and residential garages. Uniform finish with no chip texture.
Solid Colour Epoxy Flooring in Vancouver: What It Is and What It Costs
Solid colour epoxy flooring (sometimes called solid color epoxy or single-colour epoxy) is a joint-free floor coating applied in a single pigmented layer over a diamond-ground concrete slab. It costs $5 to $10 per square foot for a complete installation: primer, pigmented epoxy base coat, and a clear polyaspartic topcoat. A standard two-car Vancouver garage (400 to 500 sq ft) typically runs $2,000 to $4,000 installed.
Solid colour is the cleanest, most minimal epoxy finish available. There are no chips, no flakes, no texture variation, just a continuous, glossy or satin surface in the selected colour. Light and mid-tone greys are the most popular choices in Vancouver residential and commercial settings, followed by charcoal, white, and blues for commercial spaces. The finish reads as high-end and intentional rather than decorative.
The tradeoff is visibility. Solid colour shows dust, debris, and scuff marks more readily than flake or metallic systems, so it is better suited to spaces that are regularly swept or professionally maintained. It excels in showrooms, auto dealerships, medical and dental offices, retail floors, and residential spaces where a polished, photo-ready appearance is the priority. All Vancouver installations include ASTM moisture testing and comply with WorkSafeBC standards.
Last updated: June 2026
Available Solid Colour Blends
24 standard colours shown below, a sample of the available range. These are the solid colour options we install. Colours on screen are approximate.
Colour representation on screen is approximate and varies by monitor calibration, ambient lighting, and topcoat sheen level. Ask about specific colours on your free on-site assessment.
Solid Colour Epoxy Flooring at a Glance
| Specification | Detail |
|---|---|
| System Type | Pigmented epoxy base coat, no decorative aggregate |
| Finish Options | High-gloss, satin, or matte (topcoat dependent) |
| Colour Range | Standard colour range (see samples below) |
| Topcoat | UV-stable aliphatic polyaspartic |
| Best For | Showrooms, commercial, auto dealerships, medical |
| Materials | Professional-grade, low-VOC systems from top North American manufacturers |
| 2026 Rate | $5 to $10 per sq ft installed |
Ranges are typical Vancouver market pricing. See our full Vancouver epoxy flooring cost guide for detailed by-system and by-project pricing.
Solid Colour Epoxy Cost in Vancouver: 2026 Rates
All pricing includes diamond grinding, ASTM moisture test, primer, pigmented base coat, and polyaspartic topcoat. Exact pricing confirmed after the free on-site assessment.
| Application | Typical Size | 2026 Rate |
|---|---|---|
| Solid Colour: Single Garage | 250 to 300 sq ft | $2,000 to $3,000 |
| Solid Colour: Two-Car Garage | 400 to 500 sq ft | $2,000 to $4,000 |
| Solid Colour: Three-Car / Oversized | 700 to 900 sq ft | $3,000 to $7,000 |
| Solid Colour: Basement | 500 to 800 sq ft | $2,500 to $7,000 |
| Solid Colour: Commercial Space | 1,000+ sq ft | Quote only |
| Anti-Slip Aggregate | Where slip resistance is required | Specified in your written quote |
Floors under roughly 350 sq ft are quoted as a flat project price rather than by the square foot, since setup, mobilization and prep equipment don't scale down with the job. Final cost depends on the condition and prep of your slab; GST (5%) additional. See our full 2026 cost guide for all systems.
How We Install Solid Colour Epoxy Flooring in Vancouver
Every installation follows this sequence. Surface preparation and moisture testing are never skipped regardless of system type.
Get a Free Solid Colour Epoxy Quote
Tell us about your space: size, current condition, and preferred colour. We respond within 24 hours and arrange a free on-site assessment with colour samples.
Self-Levelling Epoxy Floor Coatings
A self-levelling epoxy floor is a solid colour epoxy poured thicker than a rolled coat, so it flows out under its own weight into a smooth, flat, high-gloss surface.
A standard solid colour floor is rolled on in thin coats that follow the texture of the concrete underneath. A self-levelling epoxy is poured at a much heavier build, typically several times the thickness of a rolled coat, then spread with a gauge rake and back-rolled with a spiked roller to release trapped air. As it cures it settles into one continuous surface that hides the fine texture and small hollows of the slab. It is the finish people picture when they think of a glossy showroom or a clean-room floor, and it is the base that metallic floors are built on.
Self-levelling epoxy is a finish, not a floor leveller. It smooths out the surface of a sound slab, but it will not correct a slab that slopes or bring a low corner up to level, and a thick pour over a sloped floor simply runs downhill. Minor hollows are filled as part of the coating build. A slab with real dips needs levelling before it is coated, and cementitious floor levelling is not a service we offer.
Self-levelling systems suit kitchens, showrooms, offices, basements finished as living space and clean workshops where a smooth, easy-to-mop surface matters more than texture. In a garage that sees wet tires, a textured flake floor is usually the safer choice, because a thick gloss surface is slippery when wet unless an anti-slip additive goes into the topcoat. Self-levelling solid colour falls within the $5 to $10 per square foot solid colour range, toward the upper end because of the extra material. See residential epoxy flooring for rooms inside the home and concrete grinding for how the slab is prepared.
Solid Colour Epoxy Warranty
Every floor we install is backed by a full written warranty, provided with your quote, covering adhesion failure, delamination, peeling, yellowing or ambering, and hot-tire pickup. We install professional-grade, low-VOC systems from top North American manufacturers.
Warranty length depends on the system installed; our tiered flake systems, for example, carry 5 to 20 years of coverage. We confirm the terms for your floor in the written quote. See how the 1-Day and 2-Day systems compare.
Solid Colour Epoxy Flooring FAQ
Answers to the questions we hear on every solid colour epoxy flooring quote call in Vancouver.