Commercial Epoxy Flooring Vancouver
Warehouse floor coatings, industrial epoxy, restaurant and retail floors across Greater Vancouver BC. Diamond-ground surface prep, forklift-rated systems, chemical-resistant coatings, and a written warranty on every floor. Free site assessment: we come to you.
Why Vancouver Businesses Choose Commercial Epoxy Flooring
A commercial or industrial concrete epoxy floor takes far more abuse than a residential one: forklifts, chemical spills, rolling loads, constant heavy traffic, foot traffic, pallet jacks, and pressure-washing at the end of every shift. Concrete on its own is porous, dusty, and vulnerable: it absorbs oils and chemicals, breaks down under repeated impact, and creates a slip hazard when wet. A properly installed commercial epoxy floor coating seals that concrete permanently, creating a joint-free, chemical-resistant surface that can handle the reality of daily operations in a Metro Vancouver facility.
In Vancouver BC, we install the full range of commercial and industrial floor coatings, from standard warehouse epoxy and epoxy floor warehouse systems for distribution centres to chemical-resistant urethane cement for commercial kitchens and novolac epoxy for pharmaceutical and brewery environments. Every installation starts with diamond grinding, moisture testing, and a written site assessment before a single coat is applied.
What Unprotected Commercial Concrete Costs You
Untreated or poorly coated concrete in Vancouver commercial facilities develops the same predictable problems. Here is what we see in most facilities before a proper industrial floor coating goes in:
Concrete Dusting
A weak surface layer breaks down under traffic, releasing fine concrete dust that coats products, equipment and shelving and is impossible to keep clean.
Forklift & Pallet Jack Wear
Hard wheels grind and powder untreated concrete at turning points and loading areas, creating ruts and surface deterioration that worsen rapidly under daily use.
Oil & Chemical Absorption
Concrete absorbs oils, solvents and cleaning chemicals instantly. Staining is permanent and contaminated concrete fails health and safety inspections.
Moisture & Vapour Problems
Vancouver's high water table means many commercial slabs have moisture vapour pressure that blisters coatings and causes delamination when not properly mitigated before installation. Our moisture vapour guide explains the ASTM testing process and which Metro Vancouver areas carry the highest risk.
Slip Hazards & WCB Liability
Bare concrete wet with oil or water is a WorkSafeBC liability. A textured anti-slip broadcast surface eliminates the hazard and documents your safety compliance.
Cracking & Spalling
Surface cracks trap bacteria and debris, worsen under loading, and eventually require expensive concrete repair. A coated surface distributes loads more evenly and prevents further deterioration.
Commercial Floor Coating Systems We Install
We match the system to your environment, load requirements, chemical exposure, and budget. Here are the five systems we install across Greater Vancouver commercial facilities:
1. Solid Colour Epoxy: Warehouses & Distribution
A 3-coat 100% solids epoxy system at 12 to 18 mil DFT with an aliphatic urethane or polyaspartic topcoat. Industry standard for warehouse floor coatings and distribution centres in Vancouver. For epoxy floor warehouse applications, this system handles forklift traffic, pallet jack loads and heavy wheeled equipment without delaminating under daily use. WCB-compliant line marking in pedestrian lanes, forklift zones and hazard areas included in the same pour.
2. Flake / Broadcast Epoxy: Retail & Commercial Garages
Decorative vinyl flake broadcast into the epoxy body coat, sealed with a UV-stable polyaspartic topcoat. Popular for commercial garage floor coatings, auto dealership showrooms, retail stores and fitness centres. Natural slip resistance from the flake texture. Available in dozens of colour blends.
3. Urethane Cement: Restaurants & Commercial Kitchens
The correct system for restaurant floors and food processing facilities. Urethane cement resists thermal shock from steam cleaning, cooking oils, acids in food waste, and the cleaning chemicals required by Vancouver Coastal Health. Meets VCH joint-free surface requirements for commercial kitchen floors. Coved base detail eliminates the wall-floor joint bacteria trap. See our full commercial kitchen epoxy flooring page for system specifications and Vancouver restaurant install examples.
4. Novolac Epoxy: Industrial, Pharmaceutical & Brewery
For facilities with solvent, acid or chemical exposure. Suitable for manufacturing, pharmaceutical, brewery and laboratory environments. ESD-safe formulations available. Novolac epoxy provides significantly higher chemical resistance than standard epoxy and is the correct choice wherever regular chemical contact occurs.
5. Quartz Broadcast: High-Slip-Resistance Environments
A quartz aggregate broadcast system for loading docks, ramps, wet rooms and anywhere slip resistance is the primary concern. Used in food processing, commercial laundries, and outdoor-adjacent commercial spaces across Vancouver. The quartz profile provides reliable traction in wet conditions that silica broadcast cannot match.
Commercial Epoxy Flooring for Every Vancouver Industry
Forklift-rated epoxy, WCB line marking, silica broadcast for traffic lanes. Written warranty on every floor.
Urethane cement systems meeting VCH joint-free surface standards. Thermal shock resistant, oil-resistant, easy to pressure-wash. Kitchen flooring guide →
High-gloss decorative epoxy and polished concrete for retail floors that handle thousands of daily footsteps and project a professional image.
Oil-resistant, tire-mark-resistant polyaspartic for service bays, repair shops, and showrooms. Resists hydraulic fluid, brake fluid, and automotive chemicals. Line marking available.
Chemical-resistant epoxy and novolac systems for manufacturing floors with solvent, acid or heavy mechanical exposure.
Acid-resistant urethane cement and epoxy systems. Coved base details and drain integration available for full VCH compliance.
Joint-free, ESD-safe and chemical-resistant systems for clinics, laboratories, cleanrooms and healthcare facilities across Greater Vancouver.
Flake or quartz epoxy with a textured grip. Easy to clean and resists daily disinfecting. We recommend rubber mats in free-weight areas.
Polished concrete and decorative epoxy for office lobbies, schools and institutional facilities. Low-maintenance, durable and professional.
Existing worn, stained or failing floors recoated without full tear-out. Diamond grind the existing surface, repair damage, and apply a fresh system over top.
High-build epoxy systems for aircraft hangars and maintenance facilities: fuel and chemical resistant, joint-free, easy to clean, built for large open spans.
Retail Units, Auto Shops, Gyms, Offices, Schools and Kennels
Most commercial floors in Greater Vancouver are not warehouses. They are a strata retail unit in a strip mall, a two-bay repair shop, a boutique gym or a dog daycare, and each one needs a system matched to what actually happens on the floor.
- Retail units and showrooms. Metallic, solid colour or polished concrete in a standard colour and sheen that suits the store, with a satin topcoat at entrances where customers come in wet.
- Auto shops and service bays. A chemical-resistant topcoat that stands up to brake fluid, coolant and hydraulic oil, with line marking for bays and walkways.
- Gyms and studios. Flake or quartz systems with grip, which take dropped weights and daily disinfecting better than vinyl. Rubber mats still belong under heavy lifting platforms.
- Offices and lobbies. Polished concrete or solid colour epoxy for low maintenance and a clean look that holds up to rolling chairs.
- Schools and daycares. Joint-free, easy-to-disinfect floors in washrooms, change rooms, art rooms and corridors, scheduled around weekends and school breaks.
- Kennels, dog daycares and vet clinics. Quartz or urethane cement with an integral cove base, so urine and cleaning water stay on the surface instead of soaking into the concrete or the wall joint. Grip is built in for paws.
Small commercial floors are quoted on site, with the install planned around your opening hours. Overnight and weekend installs can be arranged. Larger warehouse and industrial floors are covered on the industrial flooring page.
Warehouse and Industrial Epoxy Flooring in Vancouver
Warehouse epoxy flooring in Vancouver has to handle forklift wheels, pallet jacks, dropped loads and pressure-washing, often in buildings that stay damp for half the year. We build it as a 100% solids epoxy system over a diamond-ground slab, with a urethane or polyaspartic topcoat and silica broadcast in the traffic lanes. System choices, slab problems and warehouse pricing are covered in detail on our industrial and warehouse epoxy flooring page. Parking structures get a flexible membrane rather than a rigid coating; see parkade traffic coatings. Food plants and breweries use urethane cement, and electronics and lab rooms use ESD anti-static flooring.
Before any coating goes down we fill every crack, rebuild spalled control joints and moisture-test the slab. On older tilt-up buildings in Campbell Heights, Tilbury, Bridgeport and the Gloucester industrial area, the control joints are usually where a warehouse floor fails first, so they get the most attention.
- Forklift and pallet traffic: high-build epoxy or quartz broadcast in the aisles and loading areas.
- Chemical and fuel exposure: novolac epoxy for industrial epoxy flooring in plants, labs and fuel areas.
- Safety line marking: aisle lines, walkways and hazard zones painted in the same job.
- Phased installs: large floors done in zones so part of the building keeps running.
Commercial pricing depends on the system, the square footage and the prep the slab needs. See the epoxy flooring cost guide for current ranges, or book a free site assessment for a written quote. Food and kitchen spaces get a different system, covered on our commercial kitchen flooring page, and high-slip areas often get a quartz broadcast floor.
How We Install Commercial Epoxy Flooring in Vancouver
Why Vancouver Businesses Choose Epoxy Floor Vancouver
Fully Insured & WCB Covered
Liability insurance and WorkSafeBC coverage on every crew, with 500+ floors completed across Greater Vancouver: the paperwork facility managers ask for before a crew steps on site.
Diamond-Ground Every Time
Mechanical surface preparation on every job. No acid etching, no shortcuts. The prep is what determines whether the floor lasts 5 years or 20.
Commercial-Grade Materials Only
100% solids industrial epoxy and polyaspartic. Not the water-based systems sold at hardware stores. Night-and-day difference in adhesion, chemical resistance and longevity.
Written Warranty
Every commercial installation comes with a full written warranty, provided with your quote, covering adhesion failure, delamination, peeling, yellowing and hot-tire pickup. We install professional-grade, low-VOC systems from top North American manufacturers.
Health-Authority Compliant
Restaurant and food service clients receive systems that meet Vancouver Coastal Health joint-free floor surface requirements for commercial kitchens.
Locally Based in Metro Vancouver
We're not a national franchise with out-of-town crews. Local, accountable, and standing behind our work in the Greater Vancouver market.
Commercial Epoxy Flooring Vancouver: Frequently Asked Questions
Commercial Epoxy Flooring Across Greater Vancouver
We install commercial and industrial epoxy floor coatings for businesses throughout Metro Vancouver and the Fraser Valley.
Get Your Free Commercial Site Assessment
Tell us about your facility and we will arrange a free on-site assessment with a written quote, system recommendation and a scheduling plan that works around your operations.