Professional floor coating systems for North Vancouver garages, basements, and commercial floors — moisture-aware prep built for the North Shore's above-average rainfall and mountain-adjacent lifestyle.
North Vancouver garages take more punishment than almost anywhere else in Metro Vancouver. Mountain biking, skiing, hiking, kayaking — the North Shore lifestyle means garages see wet gear, trail mud, ski boot grit, and bike chain grease on a daily basis. A sealed, easy-to-clean epoxy floor is one of the most practical upgrades a North Van homeowner can make.
The North Shore also receives significantly more annual rainfall than Metro Vancouver — roughly 1,800mm per year versus the city's 1,150mm. This elevated moisture input affects concrete slabs beneath your garage and basement floors, creating higher moisture vapour emission rates that standard epoxy can't handle without proper priming. We test every North Vancouver slab for MVER before specifying any coating, and apply a moisture-tolerant primer rated for up to 25 lbs per 1,000 sq ft per 24 hours as standard.
Whether you need a garage epoxy floor in Lynn Valley, a metallic feature floor for a Edgemont Village home, a basement coating in Lonsdale, or a polyaspartic system for a Lynn Creek commercial unit — we bring professional multi-coat systems to every North Shore installation.
In 2026, epoxy flooring in North Vancouver BC costs $6–15 per square foot. Itemized written quotes before any work begins.
Three-coat systems with moisture-tolerant primer, epoxy base coat, broadcast flake or solid colour, and anti-slip polyaspartic topcoat. Built for North Shore garages that see mountain bikes, skis, kayak gear, and wet boot traffic year-round.
From $6 / sq ftNorth Vancouver's elevated rainfall increases moisture vapour pressure through basement slabs — particularly in older Lonsdale and Lower Capilano homes. We test every slab and apply moisture-tolerant primer as standard before any decorative coat.
From $7 / sq ftHigh-end metallic floor systems for Edgemont Village and Upper Lonsdale homes, showrooms, and feature garages. Three-dimensional marbled finishes with UV-stable topcoat — a popular upgrade in North Shore heritage renovations and new luxury builds.
From $12 / sq ftFast-cure, UV-stable polyaspartic systems that perform well in North Shore's cool, humid conditions. Better cold-weather tolerance than standard epoxy — important for North Van garages where doors stay open during mild but damp shoulder seasons.
From $8 / sq ftFloor coating systems for Lynn Creek commercial units, Seylynn Village retail, light industrial, and strata common areas in North Vancouver. Anti-slip broadcast and durable topcoats for high-traffic commercial environments.
Quote onlyRemoving failed DIY epoxy, peeling paint, or worn coatings from existing North Shore slabs. We diamond-grind back to bare concrete, test for MVER, and install a new professional system. Most North Van failures are moisture-related.
From $7 / sq ftNorth Vancouver sits at the base of the Coast Mountains, where orographic rainfall means the North Shore receives significantly more precipitation than Metro Vancouver's east side and the Fraser Valley. This directly affects the moisture content of concrete slabs — and therefore the adhesion of any coating applied to them.
Older North Shore homes — particularly those built in the 1960s–1980s in Lower Lonsdale, Capilano, and Deep Cove — frequently have basement and garage slabs with elevated moisture vapour emission rates. Without proper testing and priming, epoxy coatings applied to these slabs develop bubbles, blisters, and delamination within 12–24 months. This is the most common cause of epoxy failure we see on the North Shore.
Our standard North Vancouver installation protocol includes calcium chloride MVER testing, documentation of results, and a moisture-tolerant epoxy primer rated for conditions up to 25 lbs per 1,000 sq ft per 24 hours. For slabs with high moisture readings, we apply a dedicated vapour barrier coat before the decorative system. According to WorkSafeBC guidelines, moisture testing prior to coating installation is mandatory — not optional — on any concrete surface.
The BC Building Code sets baseline standards for floor coatings in commercial environments that we meet or exceed on all North Shore commercial projects.
In North Vancouver BC, professional epoxy flooring costs $6–15 per square foot depending on system and slab condition. All quotes are itemized in writing before work begins.
| System | Typical Application | 2026 Rate |
|---|---|---|
| Solid / Standard Epoxy | Garages, basements, light commercial | $7–9 / sq ft |
| Flake Broadcast System | Garages, strata, gyms | $6–8 / sq ft |
| Metallic Epoxy | Feature floors, showrooms, luxury garages | $12–15 / sq ft |
| Polyaspartic (standalone) | Garages, commercial, fast-return | $8–12 / sq ft |
| Surface Preparation Add-On | Crack repair, high-moisture primer | $1–5 / sq ft |
| Commercial / Industrial | Lynn Creek, Seylynn Village, strata | Custom quote |
Call (604) 742-9479 to confirm coverage for your specific North Shore address.
Describe your project and we'll follow up within one business day.
Our full range of floor coating services covers the entire North Shore and Metro Vancouver.