How Much Does Polyaspartic Floor Coating Cost in Vancouver?
Polyaspartic floor coating in Vancouver typically costs $6 to $12 per square foot installed, or roughly $2,000 to $7,500 for a garage, depending on the build and size. Polyaspartic sits just above standard epoxy because it cures in about a day, resists UV, and lasts longer. Epoxy Floor Vancouver gives free written quotes across Metro Vancouver. Call (604) 742-9479.
Polyaspartic Cost Per Square Foot
Installed per-square-foot ranges in Greater Vancouver, 2026, with the common epoxy systems for comparison.
| System | Per sq ft | Notes |
|---|---|---|
| Polyaspartic / polyurea | $6 to $12 | Fast cure, 100% UV-stable, longest-lasting topcoat |
| Flake epoxy + polyaspartic topcoat | $6 to $12 | Most-requested Vancouver garage build |
| Flake epoxy (base only) | $6 to $12 | Popular decorative finish |
| Solid-colour epoxy | $5 to $10 | Clean single-colour finish |
Polyaspartic is most often applied as a clear topcoat over a flake epoxy base, so you get the colour of flake with the durability and fast cure of polyaspartic. Prep and 5% GST are additional.
Polyaspartic Floor Cost by Project
| Project | Approx. size | Typical range |
|---|---|---|
| Single-car garage | 250 to 300 sq ft | $2,000 to $3,500 |
| Two-car garage | 400 to 500 sq ft | $2,000 to $4,000 |
| Three-car / shop | 700 to 900 sq ft | $3,500 to $7,500 |
| Basement / interior | 500 to 800 sq ft | $3,000 to $7,500 |
The ranges above include standard surface prep. Heavier prep (deep grinding, crack repair, moisture mitigation) is assessed on site and included in your written quote. GST (5%) is additional.
Epoxy Flooring Cost Calculator
Instant epoxy flooring rate estimate based on current Greater Vancouver market rates. Get your epoxy floor price before you call. No sign-up required.
Is Polyaspartic Worth the Extra Cost?
Polyaspartic costs a little more than epoxy, and for most Vancouver garages it is worth it. A solid-colour epoxy floor runs $5 to $10 per square foot; a polyaspartic system (including our flake floors, which use a polyaspartic base and topcoat) runs $6 to $12. What that buys is a coating that cures in about 24 hours instead of several days, stays UV-stable and highly resistant to yellowing in a sunlit garage or on a patio, and flexes with the temperature swings common in our coastal climate.
Because polyaspartic is so durable, the most cost-effective build is usually a flake epoxy base with a clear polyaspartic topcoat, so you get the decorative colour of flake and the longevity of polyaspartic in one system. A pure single-colour polyaspartic coat sits at the lower end of the range, while multi-coat polyurea systems for commercial floors sit at the top.
Where the Money Goes
Concrete prep is the biggest cost swing. Diamond grinding, crack and spall repair, and moisture mitigation each add to the total, and polyaspartic’s fast cure makes correct prep even more important: there is no long working window to fix a poorly prepared slab. We moisture-test every floor following ASTM F1869 guidance before quoting.
Build type sets the base rate: a single-colour polyaspartic coat is the lowest-cost option, a flake-and-polyaspartic hybrid is the popular mid-range, and a full multi-coat polyurea system for commercial use is the premium. Floor size matters too, since mobilization is spread across a larger area on bigger jobs.
Price Your Specific Project
Full Cost Guide
Epoxy and polyaspartic pricing across every system and room, with the live calculator.
See the full guide →Polyaspartic Coatings
How our polyaspartic and polyurea floor systems work and where they fit.
Explore polyaspartic →Cost FAQs
Get Your Free
Written Quote
Tell us about your floor and we'll send a clear, itemized quote. We cover all of Greater Vancouver and respond within 24 hours, with no obligation.