Greater Vancouver's Epoxy Flooring Specialists: Flake · Metallic · Commercial · Residential  ·  Free Quotes Available
Home › Epoxy Flooring Cost
2026 Vancouver Price Guide · Updated September 2026

How Much Does Epoxy Flooring Cost in Vancouver?

Epoxy flooring in Vancouver typically costs $5 to $18 per square foot installed for common residential systems, or roughly $2,000 to $4,000 for a finished garage, depending on the coating and concrete prep. Simple solid-colour floors sit at the low end; metallic, quartz, and terrazzo at the top. Epoxy Floor Vancouver provides free written quotes across Metro Vancouver. Call (604) 742-9479.

Cost by System

Epoxy Floor Installation Cost Per Square Foot

The coating system sets your base price. These are typical installed per-square-foot ranges for Greater Vancouver in 2026, so the epoxy flooring price you see here already includes standard prep and the topcoat.

Installed price per square foot, Vancouver 2026 (CAD)
Coating systemPer sq ftBest for
Solid-colour epoxy$5 to $10Budget-friendly single-colour garages
Flake (decorative broadcast)$6 to $12The most popular garage finish
Metallic epoxy$12 to $18High-end showpiece floors
Polyaspartic / polyurea$6 to $12Fast cure, UV-stable, heavy traffic
Quartz system$10 to $18Commercial & high-durability spaces
Polished concrete$6 to $12Low-maintenance sealed concrete finish
Terrazzo / premium custom$16 to $28Custom high-end designs

Ranges span the Vancouver market, from budget-friendly solid-colour work to premium decorative systems. Standard surface prep is included in these ranges, and 5% GST applies. A mid-range flake garage most often lands around $7 to $11/sq ft all-in. Polyaspartic cures in about 24 hours versus several days for standard epoxy.

Cost by Project Size

Epoxy Floor Cost by Garage & Room Size

Typical total installed cost for common Vancouver projects, including standard surface preparation.

Typical total installed cost, Vancouver 2026 (CAD, before GST)
ProjectApprox. sizeTypical range
Single-car garage250 to 300 sq ft$2,000 to $3,500
Two-car garage400 to 500 sq ft$2,000 to $4,000
Three-car / oversized garage700 to 900 sq ft$3,500 to $7,500
Basement floor500 to 800 sq ft$3,000 to $7,500

Small floors, like an entry or mudroom, start around $1,500, and standard surface prep is already reflected in the ranges above. Jobs needing heavy prep, moisture mitigation, or a premium system move toward the top of each range; basement floors often need moisture-aware preparation, which is assessed on site and included in your written quote.

2026 Vancouver Pricing

Epoxy Flooring Cost Calculator

Instant epoxy flooring rate estimate based on current Greater Vancouver market rates. Get your epoxy floor price before you call. No sign-up required.

◆
Transparent Pricing, No Surprises
Most flooring companies won't tell you what things cost until they're standing in your space. We believe you should have a realistic idea before we even meet. Use the calculator below as a starting point. Your final quote is confirmed at a free on-site assessment with no obligation.
500 sq ft
sq ft
Your Estimate: Vancouver 2026
Epoxy Flooring Installation Cost Estimate
Estimated range:
$2,500
to $5,000 installed in Greater Vancouver
Floor area500 sq ft
Coating typeStandard Epoxy
Protective top coatIncluded
Surface prepIncluded (minor prep)
GST (5%)+$150 to $250
Total estimate$2,650 to $5,250
Based on 2026 Greater Vancouver market rates. Standard surface prep is included. Heavier prep (deep grinding, crack repair, moisture barriers) is assessed at your free on-site assessment and included in your written quote. GST (5%) additional.
What Drives the Price

Why Two Quotes Can Differ by Thousands

Surface preparation is the biggest variable. Diamond grinding, crack and spall repair, old coating or glue removal, and moisture mitigation each add to the total. Prep is also what separates a floor that lasts 10 to 15 years from one that peels in a season, so it is not a place to cut corners.

The coating system sets the base rate shown above. Floor size affects the per-square-foot rate too, since setup and mobilization are spread across a larger area on bigger jobs. Concrete condition matters in older Vancouver homes, where slab moisture and cracks are common. We moisture-test every slab before quoting, following ASTM F1869 guidance, so the number we give accounts for what your specific floor needs.

What every job includes. Diamond grinding of the whole slab, a moisture test, cracks routed and filled with a flexible polyurea filler, the base coat, flake or pigment, the topcoat, and cleanup. We fill cracks on every job before any coating goes down, because a crack left open telegraphs straight through the new floor within a season. How much crack repair, spall repair, old coating removal or moisture-mitigating primer your slab needs is assessed on site and included in your written quote.

For a full breakdown by project, see our garage floor cost guide, epoxy resin floor cost guide, and polyaspartic floor coating cost guide.

Cost Guides by Project

Price Your Specific Project

Epoxy Garage Floor Cost

Single, two, and three-car garage pricing, plus what flake and metallic coatings cost for a Vancouver garage.

See garage floor pricing →

Epoxy Resin Floor Cost

What resin, metallic, and decorative floors cost by system and room, from garages to living spaces.

See resin floor pricing →

Patio & Exterior Coatings

Outdoor concrete priced the same way, with a UV-stable topcoat that is highly resistant to yellowing.

See patio coatings →

Cost to Epoxy a 2-Car Garage

The most common Vancouver job, priced for a standard 400 to 500 sq ft two-car garage.

See 2-car garage cost →

Cost to Epoxy a Single Garage

Pricing for a one-car garage of roughly 250 to 300 sq ft, by coating system.

See single garage cost →

Epoxy Paint vs Epoxy Coating

Why a can of epoxy floor paint and a professionally installed coating are different products, and what each costs a Vancouver garage over time.

Compare paint and coating →

1-Day vs 2-Day Flake System

What separates our 1-Day and 2-Day flake floors: build, warranty term, and what each costs for a Vancouver garage.

Compare the two systems →

Polyaspartic Coating Cost

What polyaspartic and polyurea floor coatings cost per square foot and by project, and how they compare to epoxy.

See polyaspartic cost →
Common Questions

Epoxy Flooring Cost FAQs

How much does epoxy flooring cost in Vancouver?
−
Epoxy flooring in Vancouver typically costs $5 to $18 per square foot installed for common residential systems, depending on the coating. Most finished garages run $2,000 to $4,000. Solid-colour epoxy is the lowest-cost system, while metallic, quartz, and terrazzo systems sit at the higher end. Prep and 5% GST are additional.
How much does it cost to epoxy a two-car garage in Vancouver?
+
A standard two-car garage of about 400 to 500 square feet usually costs $2,000 to $4,000 for a professionally installed flake or solid-colour floor, including surface preparation. A metallic floor in the same garage runs higher, roughly $4,800 to $9,000.
Why do epoxy flooring quotes vary so much?
+
Surface preparation is the biggest variable. Diamond grinding, crack and spall repair, old coating removal, and moisture mitigation each add to the total. The coating system and floor size then set the rest of the price.
Is there a minimum project cost?
+
Small floors, such as an entry, mudroom or powder room, start around $1,500, and a single-car garage starts at $2,000. Floors under roughly 350 sq ft are quoted as a flat project price rather than by the square foot, because mobilization, prep equipment and materials don't scale down with the job.
What does the epoxy floor installation cost include?
+
The ranges on this page are installed prices: diamond grinding, a moisture test, the base coat, flake or pigment, the topcoat and cleanup. We fill cracks on every job before coating, and garage floor crack repair is part of the floor price. So is concrete grinding, including removal of an old coating. How much crack repair, spall repair, old coating removal or moisture-mitigating primer your slab needs is assessed on site and included in your written quote.
How does the cost of epoxy flooring compare to polished concrete?
+
In Greater Vancouver, solid-colour epoxy runs $5 to $10 per square foot installed and flake runs $6 to $12, while polished concrete runs $6 to $12 depending on the finish level. Epoxy gives you colour, flake texture and a sealed surface. Polished concrete keeps the bare concrete look and needs its topical sealer refreshed every few years.
What is the epoxy flooring price for commercial and industrial floors?
+
Commercial and industrial epoxy floors in Vancouver typically run $8 to $16 per square foot, depending on the system, the traffic the floor takes and how much prep the slab needs. Warehouses and shops with forklifts usually need a thicker build or a quartz system. See warehouse epoxy flooring cost for floor-size ranges. We price commercial floors after a free site assessment.
How much does an epoxy floor coating cost per square foot?
+
An epoxy floor coating costs $5 to $18 per square foot installed in Vancouver. Solid-colour epoxy sits at $5 to $10, flake and polyaspartic at $6 to $12, and metallic at $12 to $18. Quartz runs $10 to $18 and custom terrazzo-look floors $16 to $28. The system you choose and the condition of your slab set where you land.
Ready for Your Quote?

Get Your Free
Written Quote

Tell us about your floor and we'll send a clear, itemized quote. We cover all of Greater Vancouver and respond within 24 hours, with no obligation.

Greater Vancouver & Surrounding Areas(604) 742-9479
Request a Free Quote
Epoxy flooring across Vancouver, Surrey, Langley & beyond.
We respond within 24 hours. Your info is never shared.