Serving Port Coquitlam and the Tri-Cities
Epoxy Flooring Port Coquitlam
Epoxy and polyaspartic floors for Port Coquitlam garages, strata townhomes and light industrial units. Ground, moisture tested and warrantied in writing.
Epoxy Flooring in Port Coquitlam, From Citadel Heights to Mary Hill
Epoxy flooring in Port Coquitlam costs $5 to $12 per square foot for most garage systems, and a typical two-car garage lands between $2,000 and $4,000 installed. We coat detached-home garages on Citadel Heights and in Oxford Heights, townhome garages across Riverwood and Mary Hill, and working floors in the light industrial units off Kingsway Avenue and in the Mary Hill Business Park.
Port Coquitlam sits where the Pitt River meets the Fraser, with the Coquitlam River running through the middle of town, and the city publishes a floodplain map for the low ground along all three. Slabs down on the flats hold more moisture than hillside slabs on Citadel Heights. Every floor gets a moisture test before it is quoted, and the reading decides whether it needs a moisture vapour barrier primer.
A lot of Port Coquitlam's housing is townhome and strata, and those garages come with their own rules. Strata bylaws usually need council sign-off before a floor coating goes in, and the job has to be planned around shared driveways and a neighbour's car. We can provide the written scope and product data sheets a strata council usually asks for.
Last updated: September 2026
Floor Coatings for Port Coquitlam Homes, Stratas and Shops
Most Port Coquitlam work is garages, but the city's light industrial areas keep us busy with shop and service-bay floors too.
Flake and solid colour systems for Port Coquitlam garages, diamond ground and moisture tested. Highly resistant to hot tires and road salt. $5 to $12/sq ft.
Garage epoxy detailsSingle-garage coatings for townhome complexes, scoped for strata approval and planned around shared driveways. Common in Riverwood and Mary Hill.
Single-garage costChemical-resistant systems for auto shops, contractor units and warehouse bays in the Mary Hill Business Park and along Kingsway Avenue. $8 to $16/sq ft.
Industrial floor detailsFast-curing, UV-stable coatings for garages with a south-facing door or a tight timeline. $6 to $12/sq ft.
Polyaspartic detailsMoisture-tolerant systems for Port Coquitlam basements and suites, with an ASTM moisture test before every install. $5 to $12/sq ft.
Basement epoxy detailsTraffic membranes and coatings for strata parkades, installed in phases so residents keep parking. Quoted per project.
Parkade coatingsPort Coquitlam Neighbourhoods
We work across Port Coquitlam, north and south of the Lougheed Highway, from hillside homes to the industrial units along the rail yard.
Epoxy Flooring Cost in Port Coquitlam, BC
Port Coquitlam jobs are priced on the same ranges as the rest of Greater Vancouver. Strata and commercial floors are measured and quoted on site.
| Coating System | Best For | 2026 Rate |
|---|---|---|
| Solid Colour Epoxy | Garages, utility rooms, shop floors | $5 to $10 / sq ft |
| Flake or Polyaspartic System | Residential garages, basements | $6 to $12 / sq ft |
| Metallic Epoxy | Showrooms, feature floors | $12 to $18 / sq ft |
| Polished Concrete | Retail, lofts, commercial | $6 to $12 / sq ft |
| Commercial and Industrial | Shops, warehouses, service bays | $8 to $16 / sq ft |
| Surface Preparation | Grinding, crack repair, moisture testing | Assessed on site and included in your written quote |
Ranges are installed prices before GST (5%). The number that lands inside a range depends on the size of the floor and the condition of the slab, which we confirm at the free on-site assessment. See the full 2026 epoxy flooring cost guide for single-car, two-car and basement ranges.
River Flats, Strata Garages and Light Industrial Units
Port Coquitlam is built on two kinds of ground. The hillside neighbourhoods, Citadel Heights and Oxford Heights, sit well above the river flats. The flats near the Coquitlam, Pitt and Fraser rivers, including much of Lower Mary Hill and the area around the rail yard, sit lower, and the city's floodplain map shows how much of that ground is in the river floodplain. Slabs on the flats are where we most often find moisture high enough to need a vapour barrier primer.
Strata garages are the other thing that makes Port Coquitlam work different. A townhome garage is small, often under 300 square feet, and the job is usually done in a single day with the unit owner's car parked elsewhere. Small floors like these are quoted as a flat project price rather than per square foot.
The Mary Hill Business Park and the Kingsway Avenue corridor next to the CP rail yard are full of auto shops, contractor units and small warehouses. Those floors get a thicker build and a chemical-resistant topcoat, and the install is planned around the business so it can keep operating. The details are on our commercial epoxy flooring page.
Get a Free Port Coquitlam Quote
Tell us about the floor. We respond within 24 hours and book a free on-site assessment.